Print Version

Metric Imperial

Box Specifications

General

Box builder:
Max gross weight:	35,000 kg
Tare weight:	4600 kg
Max payload:	30,400 kg
Max heat leakage:	0.0 kcal/hr/c
Max air leakage @ 25 mm SWG:	< /hr
Internal length:	11,585 mm
Internal width:	2290 mm
Internal height:	2545 mm
Cubic capacity:	67.5 m3
Net cubic capacity (below load line):	64.8 m3
Height to load line:
Door opening height:
Door opening width:	2290 mm

Exterior Construction

Exterior Cladding:
Front and Rear frame:
Roof panel:
Side panel:
Top rails:
Bottom rails:
Doors:	Fabricated MGSS Steel Door
Underfloor:
Underfloor crossmembers:
Paint on steel parts:	All steel panels have Waterborne Marine Protective paint system
Genset receptacles:	Receptacles for clip-on diesel generators

Interior Construction

Roof lining:	Aluminum, pre-painted
Side lining:	NTK D-7 Grade Stainless steel
Door lining:	NTK D-7 Grade Stainless Steel
Floor:
Drains:
Insulation:	Urethane foam insulation
Insulation blowing agent:	R-141b
Scuff Liner:

Tests

Airflow and ventilation rate:
Container is fully tested in accordance with ISO requirements: Max Gross Weight of 30,480 kgs Sidepanel test is 0.6 P Floor test is ISO plus 33%

Machinery Specifications

General

Cooling machinery manufacturer:	Carrier Transicold
Machinery model name:	ThinLine
Machinery model number:	69NT40-541-320
Refrigerant:	R134a
Microprocessor:	Carrier Microlink III
Internal depth:
Unit weight:
Power requirements:	Dual Voltage 180/460 V, 50/60 Hz, 3 phase
Power draw (cooling): (Based on 38°C ambient and 60Hz power supply)	Return air kcal/hr Power KW -18°C 4500 - 5400 6.1 - 8.2 +2°C 8000 - 11000 9.1 - 11.0
Heating capacity:	4500 kcal/hr
Evaporator air flow:	High speed: /hr Low speed: /hr
Fresh air renewal:	0 - /hr
Noise level:	db (A)

Machinery Options

Water cooled condenser:	Not included
Temperature recorder:	No; provisioned for field
Datacorder:	Yes
4 pin monitoring receptacle:	None
USDA receptacles:	Included
De-humidification:	Dehumidification Only
Controlled atmosphere:	Provis. for TransFresh field install

Machinery Remarks

Compressor:	06DR241

Although every effort is being made to maintain accurate and current information, some technical specifications are dynamic in nature. Therefore, this information is provided "as is" without warranty of any kind.