** Copy and paste into a CSV or click here to print.
Print
Metric
Imperial
TRIU8020140
Unit Status
Unit Specifications
40' High Cube Reefer (R5)
Factory
See Below
Manufacturer
China International Marine Containers
Manufacture Date
07/2011
ISO Code
45R1
CSC
F/BV/11375/11
TIR
GB/C 8832 BV/2011
Paint Type
Solvent Borne
Box Specifications
General
Box builder:
SCRC
Max gross weight:
34,000 kg
Tare weight:
4630 kg
Max payload:
29,370 kg
Max heat leakage:
34.0 kcal/hr/c
Max air leakage @ 25 mm SWG:
<
3.0 m
3
/hr
Internal length:
11,590 mm
Internal width:
2288 mm
Internal height:
2546 mm
Cubic capacity:
67.5 m
3
Net cubic capacity (below load line):
64.9 m
3
Height to load line:
2446 mm
Door opening height:
2569 mm
Door opening width:
2290 mm
Exterior Construction
Exterior Cladding:
Steel
Front and Rear frame:
Corten, hot zinc sprayed + paint
Roof panel:
MGSS, 1.0mm end & 0.8mm main
Side panel:
MGSS, 1.0mm end & 0.8mm main
Top rails:
Steel, hot zinc sprayed + paint
Bottom rails:
Steel, hot zinc sprayed + paint
Doors:
MGSS + Paint
Underfloor:
Corrugated - Corten
Underfloor crossmembers:
non applicable
Paint on steel parts:
All steel panels have Waterborne Marine Protective paint system
Genset receptacles:
Receptacles for clip-on diesel generators
Interior Construction
Roof lining:
Alu, prepainted white, 0.8mm
Side lining:
Stainless steel, with battens, 0.7mm
Door lining:
HGSS, 0.7mm
Floor:
Alu T floor, 63.5mm
Drains:
2 at front, 2 at rear
Insulation:
Polyurethane foam
Insulation blowing agent:
R-141b
Scuff Liner:
Included
Tests
Airflow and ventilation rate:
ATO-DLO (Sprenger) approved
Container is fully tested in accordance with ISO requirements:
Max Gross Weight of 30,480 kgs
Sidepanel test is 0.6 P
Floor test is ISO plus 33%
Machinery Specifications
General
Cooling machinery manufacturer:
Carrier Transicold
Machinery model name:
PrimeLine
Machinery model number:
69NT40-561-018
Refrigerant:
R134a
Microprocessor:
Microlink 3
Internal depth:
414 mm
Unit weight:
531 kg
Power requirements:
Single Voltage 360/460 V, 50/60 Hz, 3 phase
Power draw (cooling): (Based on 38°C ambient and 60Hz power supply)
Return air
kcal/hr
Power KW
-18°C
4500 - 5400
6.1 - 8.2
+2°C
8000 - 11000
9.1 - 11.0
Heating capacity:
4500 kcal/hr
Evaporator air flow:
High speed:
5437.0 m
3
/hr
Low speed:
2380.0 m
3
/hr
Fresh air renewal:
0 -
180.0 m
3
/hr
Noise level:
78 db (A)
Machinery Options
Water cooled condenser:
Not included
Temperature recorder:
Not Included
Datacorder:
Integral
Power Up rechargeable battery:
Included
RMU - Power line modem:
Not included
4 pin monitoring receptacle:
Not included
USDA receptacles:
Included
De-humidification:
Included
Transducer:
Included
Controlled atmosphere:
Provision for Transfresh included
Machinery Remarks
Condenser coil:
High capacity
Compressor:
Scroll
Although every effort is being made to maintain accurate and current information, some technical specifications are dynamic in nature. Therefore, this information is provided "as is" without warranty of any kind.